205.W17-U0 - Product Detail - Middle East area

Catalog

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

BE-W SERIES

WALL BOX CABLE+SOCKET T2

Cod. 205.W17-U0

Type 2 3P+N+E 32A 400V~ 22kW 32A 400V 3P+N+E IP54 IK08 Type 2 4m

Out of Production View replacement product

Wall mounting box in halogen free plastic with 1 connector Type 2 32A 400Vac 22kW with cable, in compliance with IEC/EN 62196-2. Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1. Version for home charging in absolute safety. Exclusive design with «dual Feel Sensitive» finish with the possibility for personalisation,made of special technopolymer highly resistant to UVA rays. High degree of protection against dust and water.
Including cable holder in anthracite technopolymer.

Commercial Series

BE-W Series

Synthetical description

WALL BOX CABLE+SOCKET T2

Material

ENGINEERING PLASTIC

Cable length

Cable section

5G6+1x0,5mm²

Rated current

32A

Rated voltage

400V

Working frequency

50/60Hz

Poles

3P+N+E

Protection degree IP

IP54

Working temperature

-30°C/+50°C

GLOW WIRE

GW 650°C

Protection degree IK

IK08

Colour

ANTHRACITE

Saline solution

Resistant

UV protection

UV resistant

Mounting version

SURFACE MOUNTING

Dimensions

235x370x115mm

Catalogue notes

Complete with cable support.

Product

EAN code

8001636103037

INTRASTAT code

8537109899

Net weight

6.617 KG

Minimum Quantity

Packaging

Packaging Carton

EAN code

Quantity

Depth

628.0 MM

Width

440.0 MM

Height

207.0 MM

Volume

57198.24 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

SOLO

EV standard

Type 2 3P+N+E 32A 400V~ 22kW

With integrated cable

Type 2

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

power contactor aperture monitoring

working in mode stand-alone free

current consuption metering

EV equipment

1 terminal strip 5x10mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 RBG led stripes

1 modular contactor 4P 40A 24Vdc

1 cable holder in technopolymer

1 current transformer

1 cable 5G6+1x0,5mm² 4m

EV excluded

upstream protections (by the installer):

1 circuit breaker 3P+N C40 30mA ist. A

1 shunt trip release 24Vdc

EV specifications

Wall mounting box in thermoplastic material halogen free resistant to impact and UV rays. Equipped with: 1 connector Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 32A three-phase 400Vac (22kW). Complete with: Current tranfromer for the control of current cosumption. Control system for power contactor aperture monitoring. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Provide suitable upstream protection designed on load and line length. Operating temperature -30°C to +50°C. Impact resistance IK08. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1, CEI EN 60304-7-722 standards and complete with CE marking.

Instruction manual

Technical drawing [PDF]

Technical drawing [STP]

InfoTECH - Detailed Data Sheet [IT]

InfoTECH - Detailed Data Sheet [EN]

Technical drawing [DWG]