205.W17-P0 - Product Detail - Middle East area

Catalog

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

BE-W SERIES

WALL BOX CABLE+SOCKET T1

Cod. 205.W17-P0

Type 1 1P+N+E 16A 230V~ 3,7kW 16A 230V 1P+N+E IP54 IK08 Type 1 4m

Out of Production

Wall Box in Halogen-free engineering plastics, for wall assembly, equipped with a Type 1 connector, 1P+N+PE 16A 230 Vac 3.7 kW, with IPXXD protection in compliance with standard IEC/EN 62196-2 Suitable for electric vehicle charging in «mode 3» in compliance with standard EN61851-1. BASIC-FREE version ideal for domestic charging in total safety Exclusive design with «dual Feel Sensitive» finish, highly resistant to UV rays, high-level IP54 protection against dust and water with the possibility for personalisation.
Including cable holder in anthracite technopolymer.

Commercial Series

BE-W Series

Synthetical description

WALL BOX CABLE+SOCKET T1

Material

ENGINEERING PLASTIC

Cable length

Cable section

3G2,5+1x0,5mm²

Rated current

16A

Rated voltage

230V

Working frequency

50/60Hz

Poles

1P+N+E

Protection degree IP

IP54

Working temperature

-30°C/+50°C

GLOW WIRE

GW 650°C

Protection degree IK

IK08

Colour

ANTHRACITE

Saline solution

Resistant

UV protection

UV resistant

Mounting version

SURFACE MOUNTING

Dimensions

235x370x115mm

Catalogue notes

Complete with cable support.

Product

EAN code

8001636039664

INTRASTAT code

8537109899

Net weight

4.129 KG

Minimum Quantity

Packaging

Packaging Carton

EAN code

Quantity

Depth

628.0 MM

Width

440.0 MM

Height

207.0 MM

Volume

57198.24 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

SOLO

EV standard

Type 1 1P+N+E 16A 230V~ 3,7kW

With integrated cable

Type 1

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

power contactor aperture monitoring

working in mode stand-alone free

current consuption metering

EV equipment

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 RBG led stripes

1 cable holder in technopolymer

1 terminal strip 3x10mm²

1 current transformer

1 modular contactor 2P 25A 24Vdc

1 cable 3G2,5+1x0,5mm² 4m

EV excluded

upstream protections (by the installer):

1 circuit breaker 1P+N D20 30mA ist. A

1 shunt trip release 24Vdc

EV specifications

Wall mounting box in thermoplastic material halogen free resistant to impact and UV rays. Equipped with: 1 connector Type 1 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 16A single-phase 230Vac (3,7kW). Complete with: Current tranfromer for the control of current cosumption. Control system for power contactor aperture monitoring. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Provide suitable upstream protection designed on load and line length. Operating temperature -30°C to +50°C. Impact resistance IK08. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1, CEI EN 60304-7-722 standards and complete with CE marking.

Instruction manual

Technical drawing [STP]

Technical drawing [PDF]

Technical drawing [DWG]

InfoTECH - Detailed Data Sheet [IT]

InfoTECH - Detailed Data Sheet [EN]