205.W17-S0 - Product Detail - Scame Parre Spa

Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE BE-W

WALL BOX CABLE+TOMA T2

Cod. 205.W17-S0

Type 2 1P+N+T 32A 230V~ 7,4kW 32A 230V 1P+N+T IP54 IK08 Tipo 2 4m

Wall Box in Halogen-free engineering plastics, for wall assembly, equipped with a Type 1 connector, 1P+N+PE 32A 230 Vac 7.4 kW, with IPXXD protection in compliance with standard IEC/EN 62196-2 Suitable for electric vehicle charging in «mode 3» in compliance with standard EN61851-1. BASIC-FREE version ideal for domestic charging in total safety Exclusive design with «dual Feel Sensitive» finish, highly resistant to UV rays, high-level IP54 protection against dust and water with the possibility for personalisation.
Including cable holder in anthracite technopolymer.

Série comercial

Série BE-W

Descrição sintéica

WALL BOX CABLE+TOMA T2

Material

TECNOPOLÍMERO

Cable length

Cable section

3G6+1x0,5mm²

Corrente nominal

32A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP54

Working temperature

-30°C/+50°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK08

Cor

ANTRACITE

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Dimensions

235x370x115mm

Catalogue notes

Completo com suporte cabo.

Product

EAN code

8001636043159

INTRASTAT code

8537109899

Net weight

4.672 KG

Quantidade Mínima

Packaging

Packaging Carton

EAN code

Quantity

Depth

628.0 MM

Width

440.0 MM

Height

207.0 MM

Volume

57198.24 CCM

DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements
DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

Version

SOLO

EV standard

Type 2 1P+N+T 32A 230V~ 7,4kW

Com cabo integrado

Tipo 2

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

power contactor aperture monitoring

working in mode stand-alone free

current consuption metering

EV equipment

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 RBG led stripes

1 modular contactor 2P 40A 24Vdc

1 cable holder in technopolymer

1 terminal strip 3x10mm²

1 current transformer

1 cable 3G6+1x0,5mm² 4m

EV excluded

upstream protections (by the installer):

1 circuit breaker 1P+N C40 30mA ist. A

1 shunt trip release 24Vdc

EV specifications

Wall mounting box in thermoplastic material halogen free resistant to impact and UV rays. Equipped with: 1 connector Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 32A single-phase 230Vac (7,4kW). Complete with: Current tranfromer for the control of current cosumption. Control system for power contactor aperture monitoring. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Provide suitable upstream protection designed on load and line length. Operating temperature -30°C to +50°C. Impact resistance IK08. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1, CEI EN 60304-7-722 standards and complete with CE marking.

Guia de instruções

Desenho Técnico [PDF]

Desenho Técnico [STP]

InfoTECH - Ficha Técnica Detalhada [IT]

InfoTECH - Ficha Técnica Detalhada [EN]

Desenho Técnico [DWG]

Esquema de ligação