205.B33-SS - Product Detail - Scame Parre Spa

Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE BE-B

PILLAR BE-B

Cod. 205.B33-SS

Type 2 1P+N+T 32A 230V~ 7,4kW 32A 400V 3P+N+T IP54 IK10 Tipo 2 4m ENROLADO

Pillar in powder paint galvanized steel with 2 connectors Type 2 32A 230Vac 7,4kW with cable with the reference IEC/EN 62196-2 and located on the side on the side. Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1 and It is particularly suited for installation in public places, this pillar is equipped with RFID Card reader for user identification and management. High degree of protection against dust and water.

Série comercial

Série BE-B

Descrição sintéica

PILLAR BE-B

Material

METAL ENVERNIZADO

Cable length

Cable section

3G6+1x0,5mm²

Cable

ENROLADO

Corrente nominal

32A

Tensão nominal

400V

Frequência

50/60Hz

Polos

3P+N+T

Grau de proteção IP

IP54

Working temperature

-30/+50°C with derating 24A

Grau de proteção IK

IK10

Cor

BRONZE

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

EM CIMA DA TORRE

Dimensions

300x1466x300mm

Product

EAN code

8001636468259

INTRASTAT code

8537109899

Net weight

56.115 KG

Quantidade Mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

1475.0 MM

Width

468.0 MM

Height

310.0 MM

Volume

213993.0 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

BUSINESS

EV standard

Type 2 1P+N+T 32A 230V~ 7,4kW

Com cabo integrado

Tipo 2

HMI (Human-Machine Interfaces)

LCD 2x20 char

User authentication

RFID authentication

Connectivity

None

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

charge managing in case of power outage

protection against overcurrents and electric shock

power contactor aperture monitoring

managing of connector locking in inlet dummy

EV equipment

1 base with separation chamber

1 fuse holder 1P+N gG 4A

1 power supply 24Vdc 36W

1 backup battery

2 DC Leakage detectors

2 control cards

2 lcd display 2x20 rows backlight

2 readers RFID 13,56MHz

2 stop charge push-buttons (mode free)

1 terminal strip 5x35mm²

1 main switch 4P 40A

2 modular contactors 2P 40A 24Vdc

2 circuit breakers 1P+N C40 30mA ist. A

2 shunt trip releases 24Vdc

2 digital energy meters MID 1P+N 40A

2 inlets dummy with RGB led

2 cables 3G6+1x0,5mm² (max extension 4m)

EV specifications

Pillar in powder paint galvanized steel with sockets located on the side and illuminated with LED frame for signaling status. Prepared for floor installation with basement with function of anti-condensation separation room. Equipped with: 2 connectors Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 32A single-phase 230Vac (7,4kW). Complete with: Automatic and residual current device for protection against over currents and indirect contact. Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Backup batteries to ensure continuity of service in the case of power outage. «Save Unlock» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD backlit display 2x20 character, for messages and diagnostic management with the possibility to change the language through the button. Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1, CEI EN 60304-7-722 standards and complete with CE marking. Lower part of the socket side customizable Color BE-BRONZE

Desenho Técnico [STP]

InfoTECH - Ficha Técnica Detalhada [IT]

Desenho Técnico [DWG]

InfoTECH - Ficha Técnica Detalhada [EN]

Desenho Técnico [PDF]

Guia de instruções