Catálogo
Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE BE-B

COLUMNA BE-B

Cod. 205.B67-CC

Type 2 3P+N+T 16A 400V~ 11kW 32A 400V 3P+N+T IP54 IK10 OCPP 1.6 JSON

Pillar in powder paint galvanized steel with 2 sockets Type 2 16A 400Vac 11 kW compliant with the reference IEC/EN 62196-2 and located on the side on the side Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1 and It is particularly suited for installation in public places, this pillar is equipped with RFID Card reader for user identification and management. The sockets are equipped with protection shutters to ensure IPXXD degree of protection and the exclusive lighting makes possible to identify the operating status. The sockets are also equipped with special plug locking system and with exclusive anti-vandal access system that allows the insertion with one hand facilitating the charging operations. High degree of protection against dust and water.
Serie comercial
Serie BE-B
Descripción
COLUMNA BE-B
Material
METAL BARNIZADO
Intensidad nominal
32A
Tensión nominal
400V
Frecuencia nominal
50/60Hz
Polos
3P+N+T
Grado de protección IP
IP54
Temperatura de ejercicio
-30/+50°C with derating 24A
Grado de protección IK
IK10
Color
BRONCE
Solución salina
Resistente
UV protection
UV resistant
Tipo de instalación
TORRETA
Dimensiones
300x1466x300mm

Product

EAN code
8001636122687
INTRASTAT code
8537109899
Net weight
0 KG
Cantidad mínima
1

Packaging

Packaging Carton
EAN code
Quantity
1
Depth
0.0
Width
0.0
Height
0.0
Volume
0.0
DIRECTIVE EMC 2014/30/UE [European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018) [International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE [European Directives] Low Voltage Directive
EN IEC 61851-1 (2019) [European Standard] Electric vehicle conductive charging system - Part 1: General requirements
Versión
PRO
EV standard
Type 2 3P+N+T 16A 400V~ 11kW
IHM (Interface Hombre-Máquina)
LCD 7'' mandos pulsadores
Autenticacion de usuario
Autenticación RFID
Connectivity
Ethernet
WiFi
GSM
Protocolo de comunicación
OCPP 1.6 JSON
EV funciones
charge in mode 3 with pwm circuit pilot
predisposition for serial communication
energy metering and current consumption
identification of authorized user
working in mode stand-alone free or personal
protection against direct contact Safety Child Shutters
charge managing in case of power outage
identification of connected cord-set size
protection against overcurrents and electric shock
interfacing with OCPP Central Station
managing of lid locking and latching system
wireless connection to web
Load Balancing function
EV equipo
1 base with separation chamber
1 fuse holder 1P+N gG 4A
1 backup battery
1 local server wired with OCPP 1.6J protocol
2 DC Leakage detectors
2 control cards
2 readers RFID 13,56MHz
1 terminal strip 5x35mm²
1 router Wi-Fi/4G
1 main switch 4P 40A
2 circuit breakers 3P+N C20 30mA ist. A
2 TFT 7'' color touch screen display
2 sockets located on the side with RGB Led
2 digital energy meters MID 3P+N 80A
1 power supply 24Vdc 60W
2 modular contactors 4P 25A 24Vdc
EV capitolato
Pillar in powder paint galvanized steel with sockets located on the side and illuminated with LED frame for signaling status.<br> Prepared for floor installation with basement with function of anti-condensation separation room.<br> Equipped with:<br> 2 sockets Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, vandal-proof lockable lid, maximum supply current 16A three-phase 400Vac (11kW).<br> Complete with:<br> Automatic and residual current device for protection against over currents and indirect contact.<br> Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA).<br> Backup batteries to ensure continuity of service in the case of power outage.<br> «Save Unlook» system to ensure the possibility of extracting the connector in the event of a blackout.<br> RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode.<br> LCD TFT color display 7in touch screen, for messages and diagnostic management.<br> Remote control by local server wired connectable to Central Station with OCPP 1.6J/5 protocol.<br> Wireless connection to web by router Wi-Fi/4G<br> Operating temperature -30°C to +50°C.<br> Impact resistance IK10.<br> Enclosure with IP54 degree of protection.<br> Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.<br> Lower part of the socket side customizable.<br> Color BE-BRONZE
thumbnail
UKCA marking
UK Conformity Assessed
thumbnail
UE
Declaratiòn de conformidad
thumbnail
EAC
Eurasian Conformity
RCM
Regulatory Compliance Mark
¿Necesita la fiche técnica del producto en formato pdf e imprimible?
Descargar la Ficha Técnica
¿Necesita documentación técnica, manuales, hojas de instrucciones o certificados?

¿Tiene el número de serie de su producto ?

¿Necesita documentación técnica, manuales, hojas de instrucciones o certificados?

Profundización

Productos relacionados

Scame Parre S.p.a
Via Costa Erta 15
24020 Parre (BG) -  Italy
Via Costa Erta 15
24020 Parre (BG) -  Italy

© 2023 Scame Parre S.p.a. - VAT IT00137900163