205.B59-SS - Product Detail - Scame Parre Spa

Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE BE-B

COLUMNA BE-B

Cod. 205.B59-SS

Type 2 1P+N+T 32A 230V~ 7,4kW 32A 400V 1P+N+T IP54 IK10 Tipo 2 4m EN ESPIRAL

Pillar in powder paint galvanized steel with 2 connectors Type 2 32A 230Vac 7,4kW with cable with the reference IEC/EN 62196-2 and located on the side on the side. Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1 and It is particularly suited for installation in public places, this pillar is equipped with RFID Card reader for user identification and management. High degree of protection against dust and water.

Serie comercial

Serie BE-B

Descripción

COLUMNA BE-B

Material

METAL BARNIZADO

Longitud cable

Sección del cable

3G6+1x0,5mm²

Tipo de cable

EN ESPIRAL

Intensidad nominal

32A

Tensión nominal

400V

Frecuencia nominal

50/60Hz

Polos

1P+N+T

Grado de protección IP

IP54

Temperatura de ejercicio

-30/+50°C with derating 24A

Grado de protección IK

IK10

Color

BRONCE

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

TORRETA

Dimensiones

300x1466x300mm

Product

EAN code

8001636122618

INTRASTAT code

8537109899

Net weight

0 KG

Cantidad mínima

Packaging

Packaging Carton

EAN code

Quantity

Depth

0.0

Width

0.0

Height

0.0

Volume

0.0

IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

PRO

EV standard

Type 2 1P+N+T 32A 230V~ 7,4kW

Con cable integrado

Tipo 2

IHM (Interface Hombre-Máquina)

LCD 7'' mandos pulsadores

Autenticacion de usuario

Autenticación RFID

EV funciones

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

charge managing in case of power outage

protection against overcurrents and electric shock

power contactor aperture monitoring

managing of connector locking in inlet dummy

EV equipo

1 base with separation chamber

1 fuse holder 1P+N gG 4A

1 backup battery

2 DC Leakage detectors

2 control cards

2 readers RFID 13,56MHz

1 terminal strip 5x35mm²

1 main switch 4P 40A

2 shunt trip releases 24Vdc

2 inlets dummy with RGB led

2 digital energy meters MID 1P+N 40A

1 power supply 24Vdc 60W

2 TFT 7'' color touch screen display

2 circuit breakers 1P+N C40 30mA ist. A

2 cables 3G6+1x0,5mm² (max extension 4m)

2 sockets located on the side with RGB Led

2 modular contactors 2P 40A 24Vdc

EV capitolato

Pillar in powder paint galvanized steel with cable sockets located on the side and illuminated with LED frame for signaling status with RGB LED stripe with three colours indicating the station's operating status. Prepared for floor installation with basement with function of anti-condensation separation room. Equipped with: 2 connectors Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 32A single-phase 230Vac (7,4kW). Complete with: Automatic and residual current device for protection against over currents and indirect contact. Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided Control system for power contactor aperture monitoring. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Backup batteries to ensure continuity of service in the case of power outage. «Save Unlook» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD TFT color display 7in touch screen, for messages and diagnostic management. Remote control by local server wired connectable to Central Station with OCPP 1.6J/5 protocol. Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking. Lower part of the socket side customizable. Color BE-BRONZE

Dibujo Tecnico [DWG]

Dibujo Tecnico [STP]

InfoTECH - Ficha Técnica Detallada [IT]

Dibujo Tecnico [PDF]

InfoTECH - Ficha Técnica Detallada [EN]