205.A59-DD - Product Detail - Scame Parre Spa

Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE BE-A

COLUMNA BE-A

Cod. 205.A59-DD

Type 2 3P+N+T 32A 400V~ 22kW 63A 400V 3P+N+T IP54 IK10

Pillar in powder paint galvanized steel with 2 sockets Type 2 32A 230Vac 22kW compliant with the reference IEC/EN 62196-2 and located in front Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1 and It is particularly suited for installation in public places, this pillar is equipped with RFID Card reader for user identification and management. The sockets are equipped with protection shutters to ensure IPXXD degree of protection and the exclusive lighting makes possible to identify the operating status. The sockets are also equipped with special plug locking system and with exclusive anti-vandal access system that allows the insertion with one hand facilitating the charging operations. High degree of protection against dust and water.

Serie comercial

Serie BE-A

Descripción

COLUMNA BE-A

Material

METAL BARNIZADO

Intensidad nominal

63A

Tensión nominal

400V

Frecuencia nominal

50/60Hz

Polos

3P+N+T

Grado de protección IP

IP54

Temperatura de ejercicio

-30/+50°C with derating 24A

Grado de protección IK

IK10

Color

BRONCE

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

TORRETA

Dimensiones

220x1466x300mm

Product

EAN code

8001636127415

INTRASTAT code

8537109899

Net weight

0 KG

Cantidad mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

0.0

Width

0.0

Height

0.0

Volume

0.0

IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

PRO

EV standard

Type 2 3P+N+T 32A 400V~ 22kW

IHM (Interface Hombre-Máquina)

LCD 7'' mandos pulsadores

Autenticacion de usuario

Autenticación RFID

Connectivity

Ethernet

EV funciones

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

protection against direct contact Safety Child Shutters

working in mode stand-alone free or personal

charge managing in case of power outage

identification of connected cord-set size

protection against overcurrents and electric shock

managing of lid locking and latching system

Load Balancing function

EV equipo

1 base with separation chamber

1 fuse holder 1P+N gG 4A

1 backup battery

2 DC Leakage detectors

2 control cards

2 readers RFID 13,56MHz

2 stop charge push-buttons (mode free)

1 terminal strip 5x35mm²

2 modular contactors 4P 40A 24Vdc

2 circuit breakers 3P+N C40 30mA ist. A

1 TFT 7'' color touch screen display

2 sockets located in front with RGB Led

2 digital energy meters MID 3P+N 80A

1 power supply 24Vdc 60W

1 main switch 4P 100A

EV capitolato

Pillar in powder paint galvanized steel with sockets located in front and illuminated with LED frame for signaling status. Prepared for floor installation with basement with function of anti-condensation separation room. Equipped with: 2 sockets Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, vandal-proof lockable lid, maximum supply current 32A three-phase 400Vac (22kW). Complete with: Automatic and residual current device for protection against over currents and indirect contact. Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Backup batteries to ensure continuity of service in the case of power outage. «Save Unlook» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD TFT color display 7in touch screen, for messages and diagnostic management. Set up for communication over RS485 serial line (NET mode with management via server). Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking. Lower part of the socket side customizable. Color BE-BRONZE

InfoTECH - Ficha Técnica Detallada [EN]

InfoTECH - Ficha Técnica Detallada [IT]

Dibujo Tecnico [PDF]

Dibujo Tecnico [DWG]

Dibujo Tecnico [STP]

Guia de instrucciones