204.WD21D-T2T2MA - Product Detail - Australia

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

WD SERIES

WALL BOX 2 SOCKETS WITH LOCK

Cod. 204.WD21D-T2T2MA

Type 2 1P+N+E 32A 230V~ 7,4kW 32A 400V 3P+N+E IP54 IK10 OCPP 1.6 JSON

Commercial Series

WD Series

Synthetical description

WALL BOX 2 SOCKETS WITH LOCK

Material

ENGINEERING PLASTIC

Rated current

32A

Rated voltage

400V

Working frequency

50/60Hz

Poles

3P+N+E

Protection degree IP

IP54

Working temperature

-30°C/+50°C

GLOW WIRE

GW 650°C

Protection degree IK

IK10

Colour

GREY

Saline solution

Resistant

UV protection

UV resistant

Mounting version

SURFACE MOUNTING

Dimensions

360x780x264mm

Product

EAN code

8001636465968

INTRASTAT code

8537109899

Net weight

13 KG

Minimum Quantity

Packaging

Packaging Carton

EAN code

Quantity

Depth

800.0 MM

Width

375.0 MM

Height

295.0 MM

Volume

88500.0 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

Version

PRO

EV standard

Type 2 1P+N+E 32A 230V~ 7,4kW

HMI (Human-Machine Interfaces)

LCD 2x20 char

User authentication

RFID authentication

Connectivity

Ethernet

Communication protocol

OCPP 1.6 JSON

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

protection against direct contact Safety Child Shutters

working in mode stand-alone free or personal

charge managing in case of power outage

identification of connected cord-set size

interfacing with OCPP Central Station

managing of lid locking and latching system

Load Balancing function

EV equipment

2 lighting bars with RGB led

1 backup battery

1 local server wired with OCPP 1.6J protocol

2 DC Leakage detectors

2 control cards

2 lcd display 2x20 rows backlight

2 readers RFID 13,56MHz

2 stop charge push-buttons (mode free)

1 terminal strip 6x35mm²

2 fuse holders 1P+N gG 4A

2 power supplies 24Vdc 36W

2 modular contactors 2P 40A 24Vdc

2 digital energy meters MID 1P+N 40A

EV excluded

upstream protections (by the installer):

2 circuit breakers 1P+N C40 30mA ist. A

EV specifications

Wall mounting box in thermoplastic material resistant to impact and UV rays and sides in painted galvanized steel. RGB LED stripe with three colours indicating the station's operating status. Equipped with: 2 sockets Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, vandal-proof lockable lid, maximum supply current 32A single-phase 230Vac (7,4kW). Complete with: Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Backup batteries to ensure continuity of service in the case of power outage. «Save Unlock» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD backlit display 2x20 character, for messages and diagnostic management with the possibility to change the language through the button. Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Remote control by local server wired connectable to Central Station with OCPP 1.6J protocol. Provide suitable upstream protection designed on load and line length. Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1 and complete with CE marking.

Technical drawing [DWG]

Technical drawing [STP]

InfoTECH - Detailed Data Sheet [IT]

Technical drawing [PDF]

InfoTECH - Detailed Data Sheet [EN]

Instruction manual